XGA Access Control Terminals have been designed by the SPEC

XGA Access Control Terminals have been designed by the SPEC

GRUPO SPEC
www.grupospec.com
[email protected]
·
Off-line capacity of more than 40,000
clockings for cards with 8 numerical
digits and without teleloading of access
schedules.
·
Configuration
of
connection
(IP,
NETMASK, GATEWAY, HOST IP, TCP
PORT) through programming.
MAIN ADVANTAGES:
·
Card repetition filter.
·
Automatic daylight saving time change.
·
Firmware version updatable online.
·
Complete control of doors (activation,
monitoring, etc.)
Direct connection to Ethernet
network with TCP / IP.
Compatible with multiple
reading technologies.
Real-Time Performance
(Online) and Deferred (Offline).
XGA Access Control Terminals have been designed by the SPEC, S.A. group to meet most
business needs in terms of access control.
XGA is based on a powerful processor that provides control, either in real time (On-line) or
Full control of doors.
deferred time (Off-line), of the readers, relays and contacts that activate access elements.
XGA terminals are connected directly to the Ethernet via TCP-IP protocol through a standard
Easy installation in walls,
ceilings and false ceilings.
RJ45 (10BaseT) connector. This standard connectivity simplifies installation, making use of
existing computing resources.
The casing has been designed to allow the terminal to be mounted on walls and ceilings or in
The IP model allows the it to
false ceilings, making it adaptable to the most suitable solution in each case.
be set outdoors.
These Terminals are designed to work specifically with the CS-Access access module used with
CS-Time software.
Ref.: XGA9015 · Rev.: EN-102
Esta revisión sustituye y anula todas las anteriores · Grupo SPEC se reserva el derecho de modificar sin previo aviso, las características de los productos incluidos en este documento.
1/2
GRUPO SPEC
www.grupospec.com
[email protected]
Processor
R-300 a 22,1 MHz, 8 bits
RAM memory
512 KB
ROM memory
512 KB (Flash Eprom)
Communications
Ethernet 10baseT, with TCP/IP protocol
Network connection
RJ45 connector
Inputs
4 TTL inputs
Outputs
2 Relays with free contacts
Readers ports
2 Clock & Data
2 RS232
1 RS232/RS485
1 HSMI
XGA9015 models:
XGA9015
Accesses Controller. Does not
include readers. To be installed
indoors.
Power supply
100/240 V AC, 50/60 Hz
or
12 V CC
Internal battery
+MnO2/Li-, 3V, 200 mAH. Enough to keep the clock/calendar running
an RAM data storage for over a year.
Clock calendar
Integrated into de processor
XGA9015IP
Box type
XGA or XGA-IP66 (hidden or outdoor mounting).
Dimensions
Box XGA: 176,2 x 85 x 205 mm
Box XGA-IP66: 280 x 90 x 180 mm
Same features as the XGA9015
model, with IP box for outdoor
installation.
Security
Tamper
Electromagnetic
compatibility
Complies with the regulations established by the EC
Controls the connection XGA9015
2 readers and 2 relays.
Can be connected to the XGA9015 access controller:
·
Magnetic stripe
·
RFID 125 kHz proximity readers
SOKYMAT UNIQUE, EM-4001(1), EM-4002(1), EM-4003(1), EM-4102(1),
Hitag™2 (Public mode A) (1), HID(1)
·
RFID 13,56 MHz proximity readers (ISO-14443, ISO-15693) (1)
Philips Mifare®, I-Code®, Inside PicoTag®, PicoPass®, HID iClass®,
LEGIC Advant®, Tag-it®, etc.
(1)
·
Fingerprint reader
·
License plate recognition readers(1)
·
Microwave readers (1)
·
UHF readers (1)
Available on request, not a standard option.
Ref.: XGA9015 · Rev.: EN-102
Esta revisión sustituye y anula todas las anteriores · Grupo SPEC se reserva el derecho de modificar sin previo aviso, las características de los productos incluidos en este documento.
2/2