docInstallation and Maintenance Manual
download 
Demanda Documentos relacionados
Belt Installation - Hytrol Conveyor Co., Inc.
the factory. To install follow these steps:
1. Thread belt through conveyor as shown (Figure 4B).
2. Pull ends together and insert lacing pin (Figure 4A).
3. Adjust belt tension with take-up pulley...
Installation and Maintenance Manual
• It is permissible to allow passage under conveyors with less
than 6 ft. 8 in. (2.032 m) clearance from the floor for other than
emergency exits if a suitable warning indicates low headroom.
