6) Hacer las conexiones de los alambres (conectores no incluidos

1) Turn off power. 2) Attach mounting strap to outlet box.

two raised dimples. Wrap ground wire from outlet box around green ground screw, and thread into hole. B) On fixtures where a cupped washer is provided. Attach ground wire from outlet box under cupp...

1) Turn off power. 2) Attach mounting strap to outlet box. (Screws not

5) Hacer las conexiones de los alambres (conectores no incluidos

1) Turn off power. 2) Attach mounting strap to outlet box. (Screws not

outlet box caja de conexion mounting bar barre de montaje fixture

1) Slip loop at top of rod over open loop at top of fixture body. 2) Turn

SEE OTHER SIDE FOR SPANISH TRANSLATIONS. VEA EL OTRO

1) Gire los brazos hasta que estén alineados con el cuerpo del arte

c) Coloque el interruptor de pared en posición de apagado “OFF”. Si

3) Screw threaded pipe into mounting strap.

We`re here to help 866-558-5706 SEE OTHER SIDE

We`re here to help 866-558-5706 SEE OTHER SIDE FOR SPANISH

We`re here to help 866-558-5706 SEE OTHER SIDE